CPU-351-13 iMX.6 Single Board Computer board

CPU-351-13 iMX.6 Single Board Computer board

The CPU-351-13 is an iMX.6 Single Board Computer board that is designed for low power (4W typical – quad core) applications that require high reliability and extended temperature operating range. With a wide range of connectivity options, including pre-certified global cellular, WiFi, Bluetooth LE and ZigBee, and support for Eurotech Device Cloud, the CPU-351-13 is the ideal platform for IoT/M2M applications. The multi-chemistry battery charger simplifies the design of portable and mobile devices, while the wide-range, protected power in, CANbus, accelerometer and GPS make it suitable for any transportation application.

HIGHLIGHTS

• IoT and M2M Ready (ESF, EDC)
• Multicore i.MX6, up to 1.2GHz
• Protected Wide Range Power In
• CANbus
• Dual video out
• WiFi, Bluetooth
• On-board Accelerometer
• Cellular and GPS Options
• Linux and WEC2013
• -40° to +85°C Operation

APPLICATIONS

• IoT/M2M
• Portable and battery operated devices
• Transportation
• Industrial
• Kiosks/POS
• Smart HMI

















Compatible magjack on CPU-351-13 iMX.6 Single Board Computer board can be provided by Ingke Technology, Ingke also can provide Pulse 10Gb Ethernet ports like
JT6-1480NL 10Gb Ethernet,JT4-1120HL10G Ethernet Ports,JT3-1101HL 10Gig integrated RJ45 FastJacks,JT4-1109HL 10 GigE LAN Ethernet,JT3-1105HL 10G Modular Jack,JT7-1119NL Integrated Connector (RJ45) Modules,
JT7-1104NL rj45 female connector,JT7-1115NL ethernet jacks,JTH-0024NL rj45 female connector,JT6-1473NL ethernet rj45 connector,JT4-1104HL ethernet connectors,JTH-0020NL LAN Magnetic,JT4-1128HL 10GbE Single Port Jacks,
JT4-1160HL RJ-45 Ethernet connectors with integrated magnetic ,JT3-1125HL Magnetics modules for LAN applications.

More info, please email Ingke Technology(ingketech.com) at info@ingketech.com.

评论

发表评论

此博客中的热门博文

NPi i.MX6ULL Dev Board

图片
NPi i.MX6ULL Dev Board A low power, i.MX6ULL-based "sandwich-style" SBC, with 512MB DDR3L RAM, 512MB NAND or 8GB eMMC storage, and I/O including 2x USB and 2x LAN ports, plus 2x 40-pin headers with RPi compatible expansion. Raspberry Pi hats can be directly put into this board. NPi i.MX6ULL board specifications: Core Module SoC – NXP MCIMX6Y2CVM08AB single Cortex-A7 core @ up to 800 MHz System Memory – 512MB DDR3L Storage NPi-i.MX6ULL eMMC module – 8GB flash NPi-i.MX6ULL NAND module – 256 MB NAND flash Breakout Board Storage – MicroSD card slot Display I/F – FPC LCD interface with 24-bit RGB and I2C touch control Networking – 2x 10/100M Ethernet ports USB – 1x USB 2.0 host port, 1x USB Type-C device port Expansion – 2x 40-pin headers including one compatible with Raspberry Pi I/O header with I2C, GPIO, ADC, UART, SPI, CSI, PWM, and the other headers exposing SNVS anti-tampering pins, I2S/SAI, Ethernet, UART, and more GPIOs Debugging – UART TTL for serial cons
阅读全文

ZestET2-J Ethernet FPGA Board

图片
ZestET2-J Ethernet FPGA Board The ZestET2-J is an easy to use FPGA board with Xilinx Artix-7 user programmable FPGA and a very high performance TCP/IP Offload Engine (TOE) chip. The board can be used as a programmable interface to external devices, for high speed processing of streaming data, and for data acquisition and control. It provides a simple bridge between a high speed computer network and a programmable digital interface. The TOE sustains a data rate over 100MBytes/s in each direction and includes a user programmable CPU for optional higher level protocols. For evaluation there are two breakout boards available: ZestET2-J-BRK-H simply connects the User FPGA IO pins to four 0.1” pitch headers. It also has the standard Xilinx JTAG header for the ZestET2-J User FPGA. ZestET2-J-BRK-F connects the User FPGA IO pins to an FMC connector and a 0.1” pitch header. It includes all power supplies for the ZestET2-J and the FMC and is powered from 12V. It also has the st
阅读全文

Tinker Edge R:SBC specially designed for AI applications

图片
Tinker Edge R The single-board computer is well suited for AI applications thanks to its powerful components. ASUS Tinker Edge R SBC preliminary specifications: SoC – Rochchip RK3399Pro hexa-core big.LITTLE processor with 2x Cortex A72 cores up to 1.8 GHz, 4x Cortex A53 cores @ 1.4 GHz, an Arm Mali-T860 MP4 GPU up to 800 MHz with OpenGL ES 1.1 to 3.2, OpenVG1.1, OpenCL 1.2 and DX 11 support, and NPU delivering up to 3.0 TOPS System Memory – 4 GB dual-channel LPDDR4 memory for system, 2 GB LPDDR3 memory for NPU Storage – 16GB eMMC flash, micro SD card slot Video Output – HDMI, DisplayPort via USB-C port, up to 2x MIPI DSI connector (one MIPI connector is multiplexed with DSI or CSI available) Audio – 3.5mm audio jack Camera – Up to 2x MIPI CSI-2 connectors Connectivity – Gigabit Ethernet, 802.11ac WiFi 5, Bluetooth 4.2 2T2R USB – 3x USB 3.1 gen1 ports, 1x USB 3.1 gen 1 type-C OTG port Expansion mPCIe slot for 4G/LTE extended; nanoSIM card slot on-board 40-pin GPIO header
阅读全文