Microsemi SF2060-STARTER-KIT



Microsemi SF2060-STARTER-KIT

SmartFusion2 Starter Kit, Programmable Logic Development Boards and Kits

Hardware Feature Overview:

    SmartFusion2 SoC FPGA in the FGG484 package (M2S060-FGG484) for SF2060-STARTER-KIT
    JTAG interface, for programming of the SmartFusion2 device
    10/100 Ethernet interface and RJ-45 connector
    USB OTG interface and mini-USB connector
    USB based Wi-Fi Module
    64MB LPDDR, 16MB SPI flash
    User push-button connected to GPIO on the SOM
    Two user-controlled LEDs connected to GPIO on the SOM
    Breadboard area available for GPIO or FPGA I/O connection
    Power good LED indicating presence of the +3.3 V SOM power
    Reset push button, Reset-out LED
    On-module clocks
    Watchdog Timer (WDT)
    Serial console interface at UART CMOS levels
    Low power mode with fast wake-up times
    Depending on the design, can provide necessary power supply voltages (+5 V, +3.3 V, +1.5 V for power-optimized SOM operation) from external sources through dedicated pads on the breadboard.

INGKE 10/100 Ethernet interface RJ-45 connector on Microsemi SF2060-STARTER-KIT


INGKE can provide 3D datasheet(STEP file) for engineers' design
INGKE’s Ethernet interface RJ-45 connector are compatible with all leading silicon vendors’ Phy’s.

INGKE Technology specializes in producing 100/1000/2.5G/5G/10G Base-T (with POE/POE+, 30w,60w,90w, 720mA,900mA) RJ45 connector & Circular Connectors(M5,M8,M12) compatible with TE, NorComp, ODU, HOLIN, LEMO,since its establishment 1993, with technology as dependence and the market as direction,we have developed to be a competitive high-tech enterprise and a leading  manufacturer of connectors.Partnered with the global leaders in these markets, we continue to develop new products to enable high-speed communication. Now we have passed the ISO14001 Environment Management System certification and our parts are all ROHS,CE,UL and SGS parts.

Now INGKE 10G Ethernet interface RJ-45 connector are very popular, please check 10G ICM YKTD-8389NL on "Marvell MACCHIATObin Double Shot” as below



评论

发表评论

此博客中的热门博文

ZestET2-J Ethernet FPGA Board

图片
ZestET2-J Ethernet FPGA Board The ZestET2-J is an easy to use FPGA board with Xilinx Artix-7 user programmable FPGA and a very high performance TCP/IP Offload Engine (TOE) chip. The board can be used as a programmable interface to external devices, for high speed processing of streaming data, and for data acquisition and control. It provides a simple bridge between a high speed computer network and a programmable digital interface. The TOE sustains a data rate over 100MBytes/s in each direction and includes a user programmable CPU for optional higher level protocols. For evaluation there are two breakout boards available: ZestET2-J-BRK-H simply connects the User FPGA IO pins to four 0.1” pitch headers. It also has the standard Xilinx JTAG header for the ZestET2-J User FPGA. ZestET2-J-BRK-F connects the User FPGA IO pins to an FMC connector and a 0.1” pitch header. It includes all power supplies for the ZestET2-J and the FMC and is powered from 12V. It also has the st...
阅读全文

NPi i.MX6ULL Dev Board

图片
NPi i.MX6ULL Dev Board A low power, i.MX6ULL-based "sandwich-style" SBC, with 512MB DDR3L RAM, 512MB NAND or 8GB eMMC storage, and I/O including 2x USB and 2x LAN ports, plus 2x 40-pin headers with RPi compatible expansion. Raspberry Pi hats can be directly put into this board. NPi i.MX6ULL board specifications: Core Module SoC – NXP MCIMX6Y2CVM08AB single Cortex-A7 core @ up to 800 MHz System Memory – 512MB DDR3L Storage NPi-i.MX6ULL eMMC module – 8GB flash NPi-i.MX6ULL NAND module – 256 MB NAND flash Breakout Board Storage – MicroSD card slot Display I/F – FPC LCD interface with 24-bit RGB and I2C touch control Networking – 2x 10/100M Ethernet ports USB – 1x USB 2.0 host port, 1x USB Type-C device port Expansion – 2x 40-pin headers including one compatible with Raspberry Pi I/O header with I2C, GPIO, ADC, UART, SPI, CSI, PWM, and the other headers exposing SNVS anti-tampering pins, I2S/SAI, Ethernet, UART, and more GPIOs Debugging – UART TTL for serial cons...
阅读全文

Microsemi A2F-EVAL-KIT-2 SmartFusion Evaluation Kit

图片
The SmartFusion Evaluation Kit board includes:     A2F200M3F-FGG484         200,000 System FPGA gates, 256 KB flash memory, 64 KB SRAM, and additional distributed SRAM in the FPGA fabric and external memory controller         Peripherals include Ethernet, DMAs, I2Cs, UARTs, timers, ADCs, DACs and additional analog resources         Refer to the SmartFusion product page for full device information     SPI-flash memory connected to SPI_0 on the device     USB connection for programming and debug from Microsemi's design tools     USB to UART connection to UART_0 for HyperTerminal examples     10/100 Ethernet interface with on-chip MAC and external PHY     RVI header for application programming and debug from either Keil or IAR Systems     Mixed-signal header for daughter c...
阅读全文